Ease Acoustic Software Crackers

EASE is the industry standard for 3D electro-acoustic and room-acoustic modeling.

• 682 Downloads • Abstract The aim of this study was to investigate the applicability of acoustic emission (AE) technique to evaluate delamination crack in glass/epoxy composite laminates under quasi-static and fatigue loading. To this aim, double cantilever beam specimens were subjected to mode I quasi-static and fatigue loading conditions and the generated AE signals were recorded during the tests. By analyzing the mechanical and AE results, an analytical correlation between the AE energy with the released strain energy and the crack growth was established. It was found that there is a 3rd degree polynomial correlation between the crack growth and the cumulative AE energy.

Using this correlation the delamination crack growth was predicted under both the static and fatigue loading conditions. The predicted crack growth values was were in a good agreement with the visually recorded data during the tests. The results indicated that the proposed AE-based method has good applicability to evaluate the delamination crack growth under quasi-static and fatigue loading conditions, especially when the crack is embedded within the structure and could not be seen visually. Fiber reinforced plastic composites (FRP) have many advantages such as high specific strength, specific stiffness, etc. However, these materials suffer from different damage mechanisms, such as matrix cracking, fiber breakage and delamination [,,, ]. The principal mode of failure in laminated composites is the separation along the interfaces of the layers, viz, delamination [,,,,, ].

This failure results in dramatic reduction of residual strength and stiffness of the structure. Delamination occurs under different loading conditions, i.e. Mode I, mode II and mode III. However, mode I delamination is the most common mode of failure occurred in the structures. This is due to lower energy that is required for the initiation of mode I delamination [,, ]. Due to complexity of laminated composites, prediction of fatigue behavior in these materials is not straight forward [ ]. Accurate measurement of fatigue crack growth has become a challenging issue in fracture mechanics analyses.

Fatigue crack growth monitoring is a difficult and time-consuming test [ ]. In addition, work gets harder when the crack is embedded within the structure and could not be seen visually. Acoustic emission (AE) is a naturally occurring phenomenon, which is the result of transient elastic wave propagation caused by a sudden release of energy inside the material [ ].

There are various sources of AE events in composite materials such as matrix cracking, fiber/matrix debonding, fiber breakage, etc. Recently, AE has been utilized as an applicable technique to detect in-situ information from the damages that occur in laminated composites [,,,, ]. Some studies have used AE technique to investigate the delamination behavior under quasi-static loading condition [,,,, ].

Fotouhi and Ahmadi [ ] investigate initiation of delamination in laminated composites under mixed-mode loading condition using AE technique. Arumugam et al. [ ] investigated damage mechanisms in glass/epoxy composite specimens under mode I delamination using AE and fast Fourier transform (FFT) analysis. Saeedifar et al. [ ] determined interlaminar fracture toughness of glass/ epoxy composites under mode I, II and mixed-mode I&II loading using AE and finite element (FE) methods. The literature review shows that most AE based studies were focused on delamination initiation and there is a lack in the investigation of delamination propagation behavior using AE technique.

Due to the complexity of the fatigue phenomenon in composite materials, little work has been done on the behavior of delamination in laminated composites under cyclic loading using AE technique. Silversides et al.

[ ] studied delamination initiation in carbon/epoxy specimens under mixed-mode cyclic loading conditions. Romhany et al. Software toko komputer full crack cinema.

[ ] offered an algorithm to predict delamination crack in carbon/epoxy specimens subjected to cyclic loading. Romhany’s method has two disadvantages: (a) to predict the fatigue crack growth at least two AE sensors must be utilized, and (b) the accurate AE wave propagation speeds in the specimens must first be calculated. The aim of this paper is to investigate the delamination propagation in glass/epoxy composites under mode I quasi-static and fatigue loading conditions.