Jcd 201m Base Microphone Manual
A new high spec base station microphone suitable for both Amateur radios and modern CB radios. There are 2 versions of the mic - one suitable for CB and one suitable for Amateur radios. We will send whichever is suitable for the radio you specify. Supplied with 1 lead, wired to suit your radio. Extra leads are available (see below).• Selectable for 2 sets of transceivers at once by slide switch. • High Sensitivity Electret Condenser Microphone Element. • High Quality Compressor Amplifier ( High - Low selectable ) built-in. It sends out constant and optimum level without distortion regardless of audio input level.
Nov 15, 2012 - wiring a JCD-201M mic to my Cobra 200 GTL DX - easy-4xcgpgmbsyetxdvhu0rk3j02 cobra.com. Download lagu barat lama terbaik. This is the Manual for the C148GTL. Driver sony vaio pcg 6s1l drivers license.
• Equipped with FM/SSB Audio Quality Selector Switch for optimum operation. The Electret Condenser Microphone ensures clearer voice quality in FM position and better voice quality on SSB. • Non-Modulation Prevention Circuit built-in. After continuous transmitting for a few minutes, the alarm circuit will be activated with alarm sound for 30 seconds.
Then, the condition returns to receiving mode automatically. • Battery-Check Circuit built-in. Turn the power switch on ( by selecting 'FM' or 'SSB' position ), and the level meter indicates the battery condition with power voltage for a few seconds.] • Optional Foot Switch Optional foot switch can be plugged into the socket on the rear of the microphone for foot operated PTT. Amplification: High - 45dB Low - 35dB Manual Dual Microphone Connectors Output: • Output A 8 Pin Standard Microphone Plug Output B 8 Pin Standard Microphone Plug Front panel switch controlled. Meter - Dual Display VU (Volume Unit) Battery Indicator 1-1/2' H x 2' W Buttons: Output Select: [Out A] [Out B] [Out-Off] Compression Level: [High] [Low] [Manual] Manual Compression Control Knob: [Minimum] [Maximum] Mode: [SSB] [FM] [Battery-Check] Channel Control Switch: [Up] [Down] Key Controls: [PTT] [Lock] Output Voltage: Amplification - 0.3mv (Lapse) Variable Amplification: 0-70mv(Lapse) Output Resistance: 500 Ohm - 100 kOhm Batteries Required: 3 ~ AAA. The following is an independant review of this base microphone, found during a search of the internet: Power amplified CB microphones have been around almost as long as CB.
Originally, most price-point CB radios did not have enough microphone amplification to reach 100% modulation levels with normal voice. People added amplified microphones to give the extra talk power they wanted in a lower cost radio.